| 66146L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:110000 N; D:180.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; B:28.00 mm; Oil Speed Rating n2:4000 rpm; d:120.000 mm; Basic Dynamic Radial Load Rating C:101000 N; Grease Speed Rating n1:3400 rpm; |
| 68501A Franke Slewing Ring Bearings | Grease:801 kN; Static (Cor):11.1 mm; Dynamic (Cr):6 mm; D:240 mm; with tapered bore:1 800 min-1; rs (min):3 mm; with cylindrical bore:1 500 min-1; Pu:662 kN; Oil:82.590 kN; d:110 mm; B:80 mm; |
| 73027L Franke Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:17000 rpm; B:12.00 mm; Basic Static Radial Load Rating Co:6000 N; Basic Dynamic Radial Load Rating C:8970 N; Grease Speed Rating Open/Shielded n1:14000 rpm; d:17.000 mm; Accessories:Two Shields; Fillet Radius ra:0.64 mm; D:40.0000 mm; |
| 66158L Franke Slewing Ring Bearings | d:130.000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2100 rpm; B:34.00 mm; Fillet Radius ra:2.00 mm; D:205.0000 mm; Basic Dynamic Radial Load Rating C:121000 N; Basic Static Radial Load Rating Co:134000 N; Oil Speed Rating n2:3500 rpm; |
| 66389L Franke Slewing Ring Bearings | da min.:444 mm; Mass bearing (including seat washer where applicable):5.6 kg; d1 ≈:458.5 mm; D1 ≈:421.5 mm; Minimum load factor A:4; Basic dynamic load rating C:125 kN; Basic static load rating C0:880 kN; H:30 mm; D:460 mm; Limiting speed:1600 r/min; Fatigue load limit Pu:16.6 kN; ra max.:1 mm; r1,2 min.:1 mm; Reference speed:1100 r/min; Da max.:436 mm; d:420 mm; |
| 69705L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:170000 N; Fillet Radius ra:2.00 mm; d:110.000 mm; B:38.00 mm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:182000 N; Grease Speed Rating n1:3000 rpm; Oil Speed Rating n2:3600 rpm; Fillet Radius rb:1.00 mm; |
| 75081A Franke Slewing Ring Bearings | Dimension D3:51.80 mm; Outher Width C:19 mm; Set Screw Size SSS:M8*1*7; Max Fillet Rad. MFR:1.0 mm; Weight W:0.55 kg; Outside Diameter D2:80 mm; Inner Width B:49.2 mm; Dimension S:19.0 mm; Basic Static Radial Load Rating Co:19000 N; Bore Diameter D:40 mm; Basic Dynamic Radial Load Rating:24700 N; |
| 66145L Franke Slewing Ring Bearings | Bore Diameter D:1 3/8 in; Weight W:0.90 lb; Outher Width C:0.7480 in; Diameter D3:1.815 in; Dimension S:0.689 in; Inner Width B:1.688 in; Basic Static Radial Load Rating Co:3440 lbf; Outside Diameter D2:2.8346 in; Insert Bearing IB:Stainless Steel; Basic Dynamic Radial Load Rating:4560 lbf; |
| 73021L Franke Slewing Ring Bearings | Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Sealed Speed Rating n3:52000 rpm; Basic Dynamic Radial Load Rating C:312 N; Width Plain B:4.0 mm; d:3.200 mm; Shielded or Sealed B1:4.0 mm; Grease Speed Rating Open/Shielded n1:75000 rpm; D:9.5000 mm; Basic Static Radial Load Rating Co:120 N; Accessories:One Seal; |
| 75041A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:19000 N; Basic Dynamic Radial Load Rating C:30700 N; D:80.0000 mm; d:40.000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; Accessories:Shield & Seal; Grease Speed Rating n1:8500 rpm; B:18.00 mm; Oil Speed Rating n2:10000 rpm; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; |
| 73088L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:163000 N; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; Fillet Radius ra:2.00 mm; B:61.90 mm; Accessories:No Shield, no Seal,; d:65.000 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; |
| 71053A Franke Slewing Ring Bearings | P150°:30.7 kN; h:46.038 mm; A1:98.425 mm; J min.:269.875 mm; P180°:36.9 kN; A2:160.338 mm; Stabilizing ring:2 x SR-1616; H2:44.45 mm; Da:170 mm; Max. speed for PosiTrac Plus seal:2150 r/min; L:361.95 mm; Cap bolt recommended tightening torque:515.2 N·m; Pa:9.43 kN; N1:19.05 mm; Cap bolt:2 x 3/4-10 UNC; Labyrinth ring:2 x LOR 43; PosiTrac Plus contact element:2 x B10724-44; J1:53.975 mm; |
| 75042A Franke Slewing Ring Bearings | Weight:1.9 kg; Da:100 max; a:73 mm; ra:2 max; Bearing designation:3310 C3 ; Pu:4.373 kN; d:50 ; Dynamic (Cr):99.898 kN; D:110 mm; da:60 min; Oil:4 500 min-1; Grease:3 800 min-1; B:44.4 mm; rs (min):2 mm; Static (Cor):96.200 kN; |
| 68953A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:800000 N; B:140.00 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1700 rpm; d:110.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2300 rpm; D:320.0000 mm; Basic Dynamic Radial Load Rating C:605000 N; |