| 73022L Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:39700 N; D:140.0000 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:17000 N; B:26.00 mm; Oil Speed Rating n2:5300 rpm; Fillet Radius ra:2.00 mm; d:80.000 mm; |
| 68504A Franke Slewing Ring Bearings | L:1170 mm; Cap bolt, rec. tightening torque:850 N·m; Q180°:2900 kN; J1:260 mm; Initial grease fill, 40%:12.5 kg; da:360 mm; Appropriate attachment bolt, size G:42 mm; J6:1070 mm; bc:243.5 mm; J:1000 mm; N1:48 mm; P55°:9600 kN; P90°:4600 kN; P150°:3000 kN; Ca:260 mm; N4 max.:35 mm; End cover:ETS 92; A1:420 mm; P120°:3400 kN; ba max.:238 mm; |
| 75062A Franke Slewing Ring Bearings | Grease Speed Rating n1:1800 rpm; Fillet Radius ra:2.00 mm; D:190.0000 mm; d:105.000 mm; B:65.10 mm; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:180000 N; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:2800 rpm; Basic Dynamic Radial Load Rating C:186000 N; |
| 75036A Franke Slewing Ring Bearings | da min.:7.1 mm; D2 ≈:10.9 mm; da max.:7.1 mm; Mass bearing:0.0016 kg; Fatigue load limit Pu:0.006 kN; Basic static load rating C0:0.146 kN; Calculation factor f0:7.4; d2 ≈:7.2 mm; Basic dynamic load rating C:0.403 kN; r1,2 min.:0.2 mm; Reference speed:110000 r/min; d:6 mm; D:12 mm; B:4 mm; ra max.:0.2 mm; Calculation factor kr:0.015; Limiting speed:56000 r/min; Da max.:11 mm; |
| 75015A Franke Slewing Ring Bearings | R1:95.25 mm; Mass pillow block:91.6 kg; Appropriate attachment bolt size G:1 in; Adapter sleeve assembly:SNW 30x5.3/8; RG:3/4 NPT; R2:39.688 mm; da:136.525 mm; P150°:80.1 kN; h:50.8 mm; Cap bolt recommended tightening torque:203.4 N·m; Bearing limiting speed:3000 r/min; Pa:32.7 kN; Cap bolt:4 x 3/4-10 UNC; J max.:463.55 mm; Labyrinth ring:2 x LOR 128; Housing:SAF 530; L:539.75 mm; ba:65.088 mm; |
| 68314B Franke Slewing Ring Bearings | Oil Speed Rating n2:3200 rpm; Basic Static Radial Load Rating Co:180000 N; Grease Speed Rating Open/Shielded n1:2600 rpm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:203000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; d:110.000 mm; D:240.0000 mm; B:50.00 mm; |
| 68502A Franke Slewing Ring Bearings | l2 max.:244 mm; d2 max.:114 mm; Basic dynamic load rating C:236 kN; Material constant KM:330; C1 max.:31 mm; dk:66 mm; Mass rod end:3.3 kg; h:185 mm; G:M 45x3; Specific dynamic load factor K:150 N/mm²; B:35 mm; Basic static load rating C0:245 kN; r1 min.:0.6 mm; l1 min.:104 mm; l7 min.:58 mm; α:6 °; d:50 mm; |
| 75010A Franke Slewing Ring Bearings | Fillet Radius rb:0.60 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:23800 N; B:28.00 mm; d:17.000 mm; D:47.0000 mm; Oil Speed Rating n2:15000 rpm; Basic Static Radial Load Rating Co:16300 N; |
| 75037A Franke Slewing Ring Bearings | with tapered bore:1 300 min-1; with cylindrical bore:950 min-1; rs (min):3 mm; Pu:1630 kN; Grease:2410 kN; Oil:218.170 kN; D:340 mm; d:200 mm; Static (Cor):16.7 mm; B:112 mm; Dynamic (Cr):9 mm; |
| 73070L Franke Slewing Ring Bearings | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:34500 N; Accessories:One Shield & Snap-Ri; B:38.10 mm; d:35.000 mm; Basic Dynamic Radial Load Rating C:49400 N; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; Grease Speed Rating n1:5600 rpm; Sealed Speed Rating n3:5600 rpm; |
| 69709L Franke Slewing Ring Bearings | D:72.0000 mm; B:27.00 mm; Basic Static Radial Load Rating Co:27500 N; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:One Shield & Snap-Ri; d:35.000 mm; Oil Speed Rating n2:8000 rpm; |
| 66161L Franke Slewing Ring Bearings | A2:234.95 mm; H2:50.8 mm; Stabilizing ring:2 x 38151-26; P60°:149 kN; End plug (suffix Y):EPR 15; R1:67.945 mm; N1:22.225 mm; Initial grease fill:232.47 g; da:111.125 mm; Cap bolt, SAE grade:5; P120°:55.6 kN; J min.:320.675 mm; Cap bolt recommended tightening torque:203.4 N·m; Da:200 mm; Housing:SAF 026 KA; Max. speed for Taconite seal:700 r/min; ba:51.594 mm; RG:3/8 NPT; J max.:368.3 mm; |
| 66151L Franke Slewing Ring Bearings | with tapered bore:1 400 min-1; D:260 mm; Static (Cor):8.3 mm; Oil:160.900 kN; with cylindrical bore:1 000 min-1; B:90 mm; Grease:1660 kN; rs (min):2.1 mm; d:170 mm; Pu:875 kN; Dynamic (Cr):4.5 mm; |
| 68711A Franke Slewing Ring Bearings | r1 max.:0.6 mm; r1,2 min.:0.2 mm; r2 max.:0.8 mm; Lw:17.8 mm; Dw:3 mm; Mass needle roller:0.99 g; |