| 73017L Franke Slewing Ring Bearings | N:26 mm; A1:34 mm; Recommended tightening torque for grub screw:16.5 N·m; J max.:165 mm; Hexagonal key size for grub screw N:4.763 mm; d:49.213 mm; Housing:SY 510 M/VZ033; Recommended diameter for attachment bolts, inch G:0.625 in; Basic static load rating C0:23.2 kN; N4:4 mm; Limiting speed:800 r/min; L:203 mm; J6:187 mm; Thread grub screw G2:3/8-24 UNF; H2:22 mm; Recommended diameter for attachment bolts, mm G:16 mm; |
| 71053A Franke Slewing Ring Bearings | P150°:30.7 kN; h:46.038 mm; A1:98.425 mm; J min.:269.875 mm; P180°:36.9 kN; A2:160.338 mm; Stabilizing ring:2 x SR-1616; H2:44.45 mm; Da:170 mm; Max. speed for PosiTrac Plus seal:2150 r/min; L:361.95 mm; Cap bolt recommended tightening torque:515.2 N·m; Pa:9.43 kN; N1:19.05 mm; Cap bolt:2 x 3/4-10 UNC; Labyrinth ring:2 x LOR 43; PosiTrac Plus contact element:2 x B10724-44; J1:53.975 mm; |
| 66166L Franke Slewing Ring Bearings | Appropriate attachment bolt size G:0.625 in; da:76.2 mm; Stabilizing ring:SR-17-14; N1:19.05 mm; Ca:45.796 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Initial grease fill:110.56 g; L:330.2 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; PosiTrac Plus contact element:2 x B10724-53; R2:22.225 mm; ba:35.719 mm; h:34.925 mm; Da:150 mm; J max.:279.4 mm; PG:1/8 NPT; A1:88.9 mm; H:187.325 mm; Cap bolt, SAE grade:8; |
| 74090A Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:251000 N; D:250.0000 mm; Fillet Radius ra:3.00 mm; B:55.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3000 rpm; d:95.000 mm; Grease Speed Rating n1:2200 rpm; Basic Static Radial Load Rating Co:245000 N; |
| 73016L Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:33800 N; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating n1:6300 rpm; d:50.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:7500 rpm; B:23.00 mm; D:90.0000 mm; |
| 73137L Franke Slewing Ring Bearings | Da:210 mm; P60°:185 kN; L:419.1 mm; H1:133.35 mm; A2:255.588 mm; ba:53.975 mm; Cap bolt, SAE grade:8; Ca:72.619 mm; Initial grease fill:379.89 g; N1:22.225 mm; Pa:22.2 kN; Cap bolt:2 x 1-8 UNC; R2:30.163 mm; Appropriate attachment bolt size G:0.75 in; Max. speed for Taconite seal:625 r/min; P150°:66.7 kN; h:46.038 mm; Stabilizing ring:2 x 36053-50; P90°:111 kN; H:258.762 mm; |
| 75041A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:19000 N; Basic Dynamic Radial Load Rating C:30700 N; D:80.0000 mm; d:40.000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; Accessories:Shield & Seal; Grease Speed Rating n1:8500 rpm; B:18.00 mm; Oil Speed Rating n2:10000 rpm; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.00 mm; |
| 73089L Franke Slewing Ring Bearings | Grease Speed Rating n1:26000 rpm; D:47.0000 mm; B:18.00 mm; Oil Speed Rating n2:38000 rpm; Basic Static Radial Load Rating Co:14300 N; Fillet Radius rb:0.15 mm; d:30.000 mm; Basic Dynamic Radial Load Rating C:15900 N; Fillet Radius ra:0.30 mm; |
| 66198L Franke Slewing Ring Bearings | b1:10 mm; M:8 mm; Specific static load factor K0:300 N/mm²; Design (sliding contact surface combination):Steel/steel; da min.:108 mm; Da min.:139.5 mm; Lubricant:Regular relubricatio; da max.:115.5 mm; B:88.9 mm; D:158.75 mm; Mass plain bearing:7 kg; Specific dynamic load factor K:100 N/mm²; Da max.:152.5 mm; b:10.5 mm; d:101.6 mm; C:76.2 mm; Sealing solution:Triple-lip seals; Basic static load rating C0:2650 kN; |
| 68480A Franke Slewing Ring Bearings | Q120°:5800 kN; P150°:3100 kN; N:60 mm; ATS:470 mm; Appropriate attachment bolt, size G:42 mm; bb:203 mm; Eye bolt, size:2 x M 42; Initial grease fill, 20%:10.5 kg; Bearing (basic designation):23188 K; J1:260 mm; Locating ring:2 x FRB 10/720; ATK:588 mm; J:1030 mm; Da:720 mm; H2:135 mm; A1:430 mm; Labyrinth seal:2 x TS 88; Initial grease fill, 40%:16 kg; s:35 mm; N4 max.:35 mm; |
| 75070A Franke Slewing Ring Bearings | G:M 30x2; C1 max.:20 mm; dk:40.7 mm; r1 min.:0.6 mm; l7 min.:34 mm; Basic static load rating C0:81.5 kN; l2 max.:149 mm; B:22 mm; Basic dynamic load rating C:93 kN; α:6 °; Material constant KM:330; d2 max.:75 mm; d:30 mm; Mass rod end:0.9 kg; Specific dynamic load factor K:150 N/mm²; h:110 mm; l1 min.:65 mm; |
| 66397L Franke Slewing Ring Bearings | Cap bolt recommended tightening torque:298.3 N·m; H1:125.425 mm; ba:51.594 mm; Mass pillow block:50.8 kg; Stabilizing ring:2 x 38151-26; Eye bolt:2 x 3/8-16 UNC; Housing:SAFS 026 KA; P90°:107 kN; P180°:72.5 kN; L:419.1 mm; Labyrinth ring:2 x LOR 115; P120°:66.7 kN; da:109.537 mm; Pa:20.2 kN; H:244.475 mm; P60°:178 kN; PG:1/4 NPT; Bearing limiting speed:3600 r/min; Cap bolt, SAE grade:8; |
| 66199L Franke Slewing Ring Bearings | J min.:150.813 mm; d2:73.819 mm; da:49.212 mm; A1:77.787 mm; L:212.725 mm; B:73.025 mm; Mass bearing unit:4.15 kg; Limiting speed:5000 r/min; H1:57.15 mm; S:0.794 mm; J max.:174.625 mm; A:58.737 mm; H:117.872 mm; H2:34.925 mm; Attachment bolt diameter G:15.875 mm; Basic dynamic load rating C:84.5 kN; s:25.4 mm; |
| 68472A Franke Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Accessories:Without Accessories; d:55.000 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Oil Speed Rating Open/Shielded n2:5000 rpm; B:33.00 mm; Basic Static Radial Load Rating Co:90000 N; Grease Speed Rating Open/Shielded n1:4100 rpm; |