| 73033L Franke Slewing Ring Bearings | Oil Speed Rating n2:6000 rpm; D:130.0000 mm; Fillet Radius ra:2.00 mm; B:31.00 mm; Basic Static Radial Load Rating Co:64000 N; Basic Dynamic Radial Load Rating C:90400 N; d:60.000 mm; Grease Speed Rating n1:4500 rpm; |
| 68617A Franke Slewing Ring Bearings | d:75 mm; Oil:30.650 kN; Pu:196 kN; rs (min):1.5 mm; Dynamic (Cr):3 mm; Grease:255 kN; Static (Cor):5.5 mm; D:130 mm; B:31 mm; with tapered bore:4 300 min-1; with cylindrical bore:3 400 min-1; |
| 67503A Franke Slewing Ring Bearings | Basic dynamic load rating C:84.5 kN; a:2.381 mm; A1:75.406 mm; A5:27.781 mm; N1:14.287 mm; Attachment bolt diameter G:12.7 mm; Limiting speed:4100 r/min; S:0.794 mm; A6:19.05 mm; L:139.7 mm; J:111.125 mm; da:50.8 mm; s:25.4 mm; B:73.025 mm; d2:73.819 mm; Mass bearing unit:4.99 kg; A:57.15 mm; |
| 73105L Franke Slewing Ring Bearings | d:340 mm; C:128 mm; Mass bearing:71 kg; Basic dynamic load rating C:2196 kN; a:161 mm; r3,4 min.:1 mm; Basic static load rating C0:4900 kN; Calculation factor Y0:2.2; Calculation factor e:0.31; T:160 mm; D1 ≈:442 mm; Calculation factor Y2:3.3; Design variant/feature:TDO/D; Comparative radial load rating CF:540 kN; Calculation factor Y1:2.2; D:460 mm; Comparative axial load rating CFa:167 kN; |
| 66172L Franke Slewing Ring Bearings | Bearing limiting speed:5300 r/min; da:82.55 mm; A2:149.225 mm; Da:160 mm; P180°:64.9 kN; Appropriate attachment bolt size G:0.625 in; ba:40.481 mm; J1:53.975 mm; Cap bolt, SAE grade:8; R1:60.325 mm; H1:101.6 mm; Cap bolt:1/2-13 UNC; h:38.1 mm; L:349.25 mm; R2:27.781 mm; P60°:157 kN; P150°:54.3 kN; S:4.763 mm; Cap bolt recommended tightening torque:149.1 N·m; H:196.85 mm; |
| 73088L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:163000 N; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; Fillet Radius ra:2.00 mm; B:61.90 mm; Accessories:No Shield, no Seal,; d:65.000 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; |
| 73005L Franke Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:825 r/min; Housing:SAFS 038 KA; Cap bolt, SAE grade:8; Initial grease fill:793.8 g; P90°:207 kN; Cap bolt recommended tightening torque:813.5 N·m; H1:169.875 mm; J min.:441.325 mm; Da:289.999 mm; End plug (suffix Y):EPR 21; PG:1/4 NPT; Labyrinth ring:2 x LOR 155; RG:3/4 NPT; Stabilizing ring:2 x 38151-38; Ca:89.789 mm; A1:158.75 mm; N1:28.575 mm; PosiTrac Plus contact element:2 x B10724-155; |
| 73129L Franke Slewing Ring Bearings | Tolerance shaft:e7; D:25 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; B:16 mm; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; α:105 °; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; d:18 mm; h:19 mm; a:3 mm; Mass bushing:0.03 kg; Coefficient of friction µ min.:0.08; |
| 73063L Franke Slewing Ring Bearings | Basic dynamic load rating C:0.247 kN; B:4 mm; Fatigue load limit Pu:0.004 kN; d:5 mm; D:10 mm; Da max.:8.8 mm; Basic static load rating C0:0.085 kN; Mass bearing:0.0012 kg; Calculation factor f0:7.6; ra max.:0.15 mm; da max.:5.9 mm; r1,2 min.:0.15 mm; Reference speed:130000 r/min; D2 ≈:8.4 mm; Limiting speed:67000 r/min; d1 ≈:6 mm; Calculation factor kr:0.015; da min.:5.9 mm; |
| 73028L Franke Slewing Ring Bearings | H2:30 mm; Locating ring:2 x FRB 13/110; N4 max.:8 mm; A2T:175 mm; H1:70 mm; P0°:210 kN; A2L:117 mm; P180°:150 kN; Initial grease fill, 20%:80 g; d2:128 mm; Appropriate attachment bolt, rec. tightening torque:200 N·m; Cap bolt, rec. tightening torque:80 N·m; N1:18 mm; Q120°:220 kN; P150°:120 kN; Da:110 mm; Appropriate attachment bolt, size G:16 mm; Mass housing:6.15 kg; |
| 75038A Franke Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:9500 rpm; Sealed Speed Rating n3:5000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:8000 rpm; Basic Dynamic Radial Load Rating C:16500 N; D:80.0000 mm; Basic Static Radial Load Rating Co:14000 N; d:55.000 mm; B:13.00 mm; Accessories:One Shield; |
| 77210A Franke Slewing Ring Bearings | Fatigue load limit Pu:0.011 kN; d2 ≈:6 mm; d:3 mm; Basic static load rating C0:0.25 kN; Calculation factor f0:6.4; ra max.:0.2 mm; B:5 mm; Basic dynamic load rating C:0.741 kN; Reference speed:110000 r/min; Limiting speed:70000 r/min; Mass bearing:0.0029 kg; r1,2 min.:0.2 mm; D2 ≈:11.35 mm; Calculation factor kr:0.035; D:13 mm; da min.:4.6 mm; Da max.:11.5 mm; |
| 66165L Franke Slewing Ring Bearings | Mass withdrawal sleeve:32 kg; d1:420 mm; B2:264 mm; A:9 mm; d:440 mm; G1:30 mm; Hydraulic nut:HMV 92 E; G:Tr 460x5; B1:242 mm; G2:G 1/4; |
| 75011A Franke Slewing Ring Bearings | r, r1,2 min.:0.6 mm; Mass inner ring:0.064 kg; d:50 mm; F:55 mm; B:20.5 mm; |